How To Reinstall Mac Os X Yosemite

• How To Reinstall Mac Os X Yosemite To El Capitan
• How To Install Mac Os X Yosemite Without A Mac
• How To Reinstall Mac Os X

Free Operating systems: Open source OS for All PC Users; It is recommended that once the equipment and completely frees of junk data files or downloads and install the new version of Mac OS X Yosemite formatted. Download OS X Yosemite DMG File (OS X Yosemite Free Download) from the official site. But they're also what you do if something really bad happens to the copy of OS X that you boot your Mac from, or if the version of OS X on your Mac is earlier than 10.10 El Capitan. In other words, these instructions describe the process for installing, reinstalling, or upgrading OS X El Capitan.

my cousin gave me her old macbook. When I booted it up, i noticed that all of her information was still on it. So i found a website that gave me directions on how restore the laptop to its factory settings. I followed the instructions and went to try and reinstall the os x. It asked me for my apple id. When i procedded to type in my apple id, i got an error message. after looking up this error message, i found out that it wanted me to type the apple id of the person who originally upgraded the computer to yosemite. I tried to contact my cousin to ask for her password (to get her personal info off), and she refused to give me her info.

So now the mac goes straight to the os utilities and cannot start up. If someone can please guide me through how to get my mac up and running, it will be greatly appreciated.

Thank you!

MacBook

Posted on

If you're interested in running Mac OS X, but you don't want to pay ridiculous prices for a normal Mac, then a Hackintoshjust might be for you. Right now, the newest iteration of OS X is 10.10, known as Yosemite. In this guide, we'll show you how to install Yosemite on your PC with the nely released 'Yosemite Zone' distro, from Niresh.

Gimpshop mac os x. The advantages of Unibeast vs. Yosemite Zone
Yosemite is a distro, which is a pirated copy of Mac OS X that has been modified to work with a PC. Distros are a popular Hackintosh alternative to Unibeast, a better-known installation tool which requires a retail copy of Mac OS X instead.

Yosemite Zone is essentially just a renamed version of the Niresh distro that we've covered previously on this website, except it has been updated to work with Apple's newest version of Mac OS X. Using Yosemite Zone instead of Unibeast offers a far share of advantages– if you don't have any qualms with the legal issues regarding distros, they're actually the most convenient way to set up your Hackintosh:

Free Operating systems: Open source OS for All PC Users; It is recommended that once the equipment and completely frees of junk data files or downloads and install the new version of Mac OS X Yosemite formatted. Download OS X Yosemite DMG File (OS X Yosemite Free Download) from the official site. But they're also what you do if something really bad happens to the copy of OS X that you boot your Mac from, or if the version of OS X on your Mac is earlier than 10.10 El Capitan. In other words, these instructions describe the process for installing, reinstalling, or upgrading OS X El Capitan.

my cousin gave me her old macbook. When I booted it up, i noticed that all of her information was still on it. So i found a website that gave me directions on how restore the laptop to its factory settings. I followed the instructions and went to try and reinstall the os x. It asked me for my apple id. When i procedded to type in my apple id, i got an error message. after looking up this error message, i found out that it wanted me to type the apple id of the person who originally upgraded the computer to yosemite. I tried to contact my cousin to ask for her password (to get her personal info off), and she refused to give me her info.

So now the mac goes straight to the os utilities and cannot start up. If someone can please guide me through how to get my mac up and running, it will be greatly appreciated.

Thank you!

MacBook

Posted on

If you're interested in running Mac OS X, but you don't want to pay ridiculous prices for a normal Mac, then a Hackintoshjust might be for you. Right now, the newest iteration of OS X is 10.10, known as Yosemite. In this guide, we'll show you how to install Yosemite on your PC with the nely released 'Yosemite Zone' distro, from Niresh.

Gimpshop mac os x. The advantages of Unibeast vs. Yosemite Zone
Yosemite is a distro, which is a pirated copy of Mac OS X that has been modified to work with a PC. Distros are a popular Hackintosh alternative to Unibeast, a better-known installation tool which requires a retail copy of Mac OS X instead.

Yosemite Zone is essentially just a renamed version of the Niresh distro that we've covered previously on this website, except it has been updated to work with Apple's newest version of Mac OS X. Using Yosemite Zone instead of Unibeast offers a far share of advantages– if you don't have any qualms with the legal issues regarding distros, they're actually the most convenient way to set up your Hackintosh:

• You don't need a real Mac. Unibeast is a Mac app, so you need to have an existing Mac OS X installation for it to work. This usually means that you either have to find a real Mac, or set up a Mac virtual machine. However, with Yosemite Zone, you can just set up everything from a Windows computer.
• The post-installation is easier. By default, Yosemite Zone will automatically install necessary Hackintosh-specific kexts and drivers for your computer when you boot your Mac OS X installation for the first time. Unibeast requires you to do this manually, using the Multibeast tool. While the post-installation in Yosemite Zone isn't perfect (you'll probably have to use Multibeast anyways), it's still a nice convenience.
• You can install it on a hard drive that already has Windows installed. By default, the Mac OS X installer will not work with hard drives that were originally formatted in Windows. Therefore, if your computer's hard drive already has Windows installed on it, you won't be able to install Mac OS X on there. Normally, you can bypass this limitation on Unibeast by applying the MBR patch; however, Yosemite Zone does this for you automatically, saving you one extra step.
• Yosemite Zone supports more hardware (including AMD). Normally, computers that use AMD processors are unsupported by Mac OS X. However, Yosemite Zone includes experimental 'patched' kernels that may allow Mac OS X to work with these processors regardless.

Free dracula games. Interested? Here are the requirements:

How To Reinstall Mac Os X Yosemite To El Capitan

• Multibeast (Free): Multibeast is a collection of kext files that your Hackintosh will need to run properly, after the initial installation. Be sure to download the newest version 7 of Multibeast, not the older versions 3, 4, 5, or 6 (which are for Snow Leopard, Lion, Mountain Lion, and Mavericks respectively).

1a. Create your Yosemite Zone USB drive (Mac)

Double click on 'Restore Yosemite.pkg' to start the app. By default, the app will be aimed at your computer's main hard drive (mine is named 'Super Panda' in the screenshot below). Google search app mac. You do not want this– instead, click through the installer until you reach the page with the 'Change Install Location' button.

From here, change the install location of the app to your USB drive (mine is named 'Macaroni' in the screenshot below).

Press the enter/return key. The app will ask for your system password. After you enter your password, it will begin writing the Yosemite Zone disk image onto the USB drive. This will probably take 20-40 minutes, though it may take longer, depending on the speed of your USB drive. Once it finishes, your USB drive will contain a fully bootable version of the OS X Yosemite installer.

NOTE: 'Restore Yosemite.pkg' is very glitchy. If you can't find the 'Change Install Location' button on the first time that you run the app, restart your computer and re-run the app.

1b. Create your Yosemite Zone USB drive (Windows)

Follow this step if you're setting up Yosemite Zone on Windows. Plug your USB drive into your computer, and open TransMac. Find your USB drive on the left-hand column of the TransMac window. Right-click on the USB drive, and click 'Format Disk for Mac'. This will delete all of the files on your drive and prepare it for Mac OS X.

Once your USB drive is done formatting, right-click it again and click 'Restore with Disk Image'. A file selection window will pop up; choose your Yosemite Zone disk image file (it will probably be called 'Yosemite-Zone.dmg'), and proceed. Now, TransMac will write Yosemite Zone onto your USB drive.

This will probably take 20-40 minutes, though it may take longer, depending on the speed of your USB drive. Once TransMac finishes, your USB drive will contain a fully bootable version of the OS X Yosemite installer.

2. Set up the parts of your PC
I covered these steps in my Snow Leopard guide, but they're worth mentioning again:

• Unplug all USB-connected devices from your computer before you begin the setup (except your keyboard and mouse). A faulty external USB hard drive can cause your Hackintosh bootloader to give you EBIOS errors on startup.
• Open up your computer and unplug any extra internal hard drives that your computer has, besides the hard drive that you're installing OS X on. (Just unplug the hard drive SATA cables from your motherboard.)
• If possible, connect your monitor to the DVI port of your computer's graphics. The Mac OS X installer sometimes has problems with HDMI and VGA.

3. Set up your motherboard's BIOS

Not sure whether your computer's motherboard uses BIOS or UEFI? Here's a quick guide to differentiating between the two: the interface of BIOS is usually monochrome and entirely text-based. Meanwhile, the interface of UEFI usually has pictures, and allows you to use your mouse pointer.

Depending on the brand and standard used by your computer's motherboard, adjust your settings accordingly:

• If you own a Gigabyte motherboard with BIOS: Guide
• If you own a Gigabyte motherboard with UEFI: Guide
• If you own a non-Gigabyte motherboard with UEFI (from tonymacx86):
  • To access BIOS/UEFI Setup, press and hold Delete on a USB Keyboard while the system is booting up.
  • Load Optimized Defaults.
  • Set USB drive to the highest boot priority.
  • If your CPU supports VT-d, disable it.
  • If your system has CFG-Lock, disable it.
  • If your system has Secure Boot Mode, disable it.
  • If your system has OS Type, set it to Other OS.
  • Save and exit.

Once that's done, plug in your Unibeast USB drive in your computer, and then restart your computer. Conncect mac computer to alexa.

4. Boot into Yosemite Zone
Restart your Hackintosh, and plug in your Yosemite Zone USB drive. If things go well, your computer will boot from the USB drive instead of booting from your normal hard disk. You will then be able to view the Yosemite Zone menu.

If you do not manage to reach the Yosemite Zone menu, check your motherboard's BIOS settings to make sure that the changes you made in Step 3 were properly applied. If they were, but you still cannot boot from the Yosemite Zone USB drive, unplug your USB drive, and go back to Step 1. Reformat your USB drive with Disk Utility and try again. If all else fails, try using a different USB drive for Yosemite Zone.

At the Yosemite Zone menu, press the enter key (or return key) to start the OS X Yosemite installer. The installer screen will take several minutes to load. If you are trying to install OS X Yosemite on a computer using an AMD processor, you'll have to type the boot flag '/amd', '/amd32', '/amd64', or '/amdfx (without quotation marks)– which flag you need depends on your specific processor, so test one flag a time.

In the worst case scenarios, instead of loading the Mac OS X installer, you may end up at a dark gray screen that tells you to restart your computer (a kernel panic), or you may end up with a small crossed-out sign (a loading error). If you get a kernel panic/loading error (or if the Mac OS X installer simply won't start within 10 minutes), you'll need to enter some boot flags. To enter boot flags, manually restart your computer by pressing your computer's power button. Then, once you've booted back into the Yosemite Zone menu, try typing any necessary boot flags before pressing the enter/return key. Check out our list of common boot flags and our guide to fixing boot problems with verbose mode for reference.

You need to use Disk Utility to erase a hard drive partition so that OS X Yosemite can install itself on it. In the sidebar of Disk Utility, choose the hard drive partition where you want Yosemite installed, and erase it by using the 'Erase' tab. You can also just erase the entire hard drive (this is the preferred solution if you don't plan to dual-boot Windows and Mac OS X from the same hard drive). In the screenshot below, my two hard drive partitions are called 'Cool Stuff' and 'Not Cool Stuff', while my entire hard drive is called '21.47 GB VBOX HARDDRIVE'.

When erasing, the format should be set to 'Mac OS Extended (Journaled)'. You can also partition the hard disk by using Disk Utility's Partition tab.

NOTE: Mac OS X cannot boot from a partition that's larger than 1 TB in size, so if you have a 2 TB hard drive, you will have to partition it.

On the installation page for Mac OSX, the hard disk/disk partition should now be showing up. Select it, and then click the 'Customize' button on the bottom left. This is where using a distro becomes really useful: Yosemite Zone allows you to install extra Hackintosh drivers and kexts, straight from the OS X Yosemite installer. The 'Customize' page essentially does the same thing as Multibeast, though the layout (and most of the names of the options) are different.

However, choosing the right options from this page can be really tricky, so unless you're absolutely certain about which drivers and kexts you need to install for your computer, I don't recommend installing too much stuff from here. The default selection will enable Mac OS X to boot from the hard drive without any assistance, and automatically enable audio and ethernet. For most computers, that will be enough.

If you wish to install more, refer to our guide to Multibeast. Otherwise, you can figure out the rest in Step 7, where you'll actually set up your Hackintosh with Multibeast.

https://washingtondownload.mystrikingly.com/blog/message-games-on-android. If your computer already has Mac OS X installed and you are simply updating it to Yosemite, you can just uncheck all of these options. Mac OS X treats Yosemite as just another update– there's no need to reinstall all of your kexts and drivers.

How To Install Mac Os X Yosemite Without A Mac

Once you're done with the 'Customize' page, install Yosemite. This will take at least 30 minutes.

6. Boot into Mac OS X
Once the installation finishes, remove your Yosemite Zone USB drive, and restart your computer. At the boot screen, you'll see an Apple icon for the hard drive where you installed Yosemite. Select it (use the arrow keys on your computer) and press 'Enter'.

Yosemite will boot. Mission accomplished! Once again, if you get a kernel panic/loading error when you try to boot your new Yosemite installation (or if the installation simply won't start within 10 minutes), you'll need to enter some boot flags. To enter boot flags, manually restart your computer by pressing your computer's power button. Then, once you've booted back into the Yosemite Zone menu, try type any necessary boot flags before pressing the enter/return key. Check out our list of common boot flags and our guide to fixing boot problems with verbose mode for reference.

Once Yosemite has booted successfully, click through through the Mac OS X setup screens until you reach the desktop. From here, Yosemite Zone will work its magic, and automatically install the rest of the Hackintosh-specific kexts and drivers from Step 5.

How To Reinstall Mac Os X

Wait several minutes, while this process works in the background. Once you receive a notification saying that the installation has been completed, restart your computer.

7. Multibeast
Multibeast is a collection of kext files that you'll need to install for your Hackintoshes to have sound, internet, a high resolution screen, and more. Different Hackintosh builds require different Multibeast setups, though most setups are very similar. Find out what options you need to install by checking our Multibeast guide to OS X Yosemite.

Whether you're installing OS X on your computer for the first time, or just updating your computer from an older version of OS X, you'll probably have to run Multibeast after the initial installation of Yosemite.

To run Multibeast in OS X Yosemite, you may have to go the 'Security' section of System Preferences in Mac OS X, go to the 'General' section, and check 'Anywhere' in the 'Allow applications' section. After running Multibeast, you'll also probably want to change your BIOS settings back to normal (from Step 4).

Once that's done with, you should be running a fully functional copy of OS X Yosemite on your PC. If you plan on updating Mac OS X in the future, check out our guide to updating your Hackintosh. Congratulations!